At the right time at the right place – montrac® symbolizes absolute flexibility in the intralogistics field.

Watch it on youtube-icon_30x30

montrac® was designed to be extraordinarily simple. The monorails and trac connections enable a very easy and quick installation. All components have the same basis and are compatible with each other. All tracs are available in whatever length required. The bypasses, switches and curves have been deliberately designed with a very short length. Contrary to the traditional conveyor belt montrac® can be perfectly adapted to spatial conditions. Thanks to its monorails, montrac® can also run in curves with a very small radius. Parts of different sizes can be transported on the same track at the same time. There are practically no limits to the layout flexibility. With our configuration tool you can expand, modify or adapt your system at will, and this at ease!

Watch it on youtube-icon_30x30

A shuttle can always be removed with one hand grip from your production process without stopping the line so that montrac® runs at anytime with no single point of failure, in contrast to an ordinary conveyor system. The Shuttles and switches are the only active components in the system. The Shuttle has been designed in such a way that it requires low maintenance. The Trac as a passive element is always operational.

“Smart Logistic Technology” is a method of allowing the Shuttles to operate the rail system of a montrac transport system independently of a master control. The Smart Logistic Technology originated from the possibility to link identity characteristics with control commands to allow track components to operate autonomously. The master control is relieved from the duties related to the temporally and functionally correct activation of rail system control elements. Thus, on master control level more attention can be given to the machining processes in the processing stations.

montrac® offers you  the opportunity to have your workpieces tested or further processed during transport. The opportunities resulting from a power supply on the  Shuttle – permanently available with a maximum output 3A at 24 VDC – are practically unlimited. Allow free play to your fantasy and revolutionize your transport system and your production along with it!

The transport system montrac® is freely accessible at all times. On the one hand the system operates at low DC voltage (24 or 48 V), so that there is no need for an extensive protection against contact. On the other hand each shuttle is equipped with sensor-controlled safety technology which detects obstacles on the rail system and stops the shuttle automatically.

Watch it on youtube-icon_30x30